Jump to content
Sign in to follow this  
Mo Collier

Help Please

Recommended Posts

Hello All,

I'm new to this firing business but I'm not sure my Blue-diamond Tru-mat- tic was supposed to reach ^06 in a matter of only 4.5 hours. is this even possible? It's a relatively small kiln and was a small "loose" load. I needed to fire under-full to meet a deadline. Any thoughts on this would be appreciated...

 

thanks

Mo

Share this post


Link to post
Share on other sites

So it didn't reach temp? Took longer? What exactly happened? Did the cone shut it off? 4.5 hours is quite possible, especially in a small kiln.

 

 

The ^ in the sitter bent enough for it to shut down, I don't have a digital read for temp so I'm merely hoping that it indeed did reach temp. I know that's probably not the best approach and I am still waiting for Blue diamond to get back to be about a thermometer for that kiln. Thanks for the feed back it is very much appreciated.

Share this post


Link to post
Share on other sites

If the cone bent, you're good to go, unless something odd happened that knocked the cone out, but that's very very unlikely. I wouldn't fret. My L&L e18T-3 (18 x 27 inches) kiln can get to 04 in just over 4 hours.

 

 

I only use my kiln setter to fire. You'll be ok.

Share this post


Link to post
Share on other sites

If the cone bent, you're good to go, unless something odd happened that knocked the cone out, but that's very very unlikely. I wouldn't fret. My L&L e18T-3 (18 x 27 inches) kiln can get to 04 in just over 4 hours.

 

 

Thanks! very happy to hear that and appreciate the info....

Mo

Share this post


Link to post
Share on other sites

If the cone bent, you're good to go, unless something odd happened that knocked the cone out, but that's very very unlikely. I wouldn't fret. My L&L e18T-3 (18 x 27 inches) kiln can get to 04 in just over 4 hours.

 

 

I only use my kiln setter to fire. You'll be ok.

 

 

Thanks for the feedback, its very much appreciated. :0)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.