sad duck Posted March 11, 2013 Report Share Posted March 11, 2013 I have made several molds and I'm having trouble with them sticking! Earthenware clay bisked it,using Earthenware clay. I put spray cooking oil on the mold, still sticks! Any one know what I'm not doing right? Sad Mud! Link to comment Share on other sites More sharing options...
Marian65 Posted March 11, 2013 Report Share Posted March 11, 2013 I have made several molds and I'm having trouble with them sticking! Earthenware clay bisked it,using Earthenware clay. I put spray cooking oil on the mold, still sticks! Any one know what I'm not doing right? Sad Mud! I use metal and glass and one old two-piece plaster mold, all as press molds. I use plain ol' Argo Corn Starch, brushed into all the little parts of the design and so far it has worked great. Any corn starch left on the piece cooks off in the bisque firing. I used a cheap cooking spray on a metal mold when I first started using it. It stayed sticky after many uses, so I just started brushing corn starch over it and keep on using it. Maybe the earthenware is still too porous to use for a mold. I'm not knowledgeable about earthenware, but someone is certain to give you a better answer soon! Link to comment Share on other sites More sharing options...
weeble Posted March 11, 2013 Report Share Posted March 11, 2013 What sort of mold are you talking about, sad duck? Link to comment Share on other sites More sharing options...
Mark C. Posted March 12, 2013 Report Share Posted March 12, 2013 First I would like some more info-is this a two piece mold and you are pouring slip into or a mold your are press molding clay onto? Is the mold made from plaster? or something else? Also do not ever use oil of any kind on plaster as it seals the surface so the plaster can no longer soak up the water from clay and it will not dry out and release. The more details you can add the better we can help Mark Link to comment Share on other sites More sharing options...
justanassembler Posted March 12, 2013 Report Share Posted March 12, 2013 First I would like some more info-is this a two piece mold and you are pouring slip into or a mold your are press molding clay onto? Is the mold made from plaster? or something else? Also do not ever use oil of any kind on plaster as it seals the surface so the plaster can no longer soak up the water from clay and it will not dry out and release. The more details you can add the better we can help Mark I believe OP was trying to say she is attempting to use a bisque mold +1 for never using release agents. Link to comment Share on other sites More sharing options...
Mark C. Posted March 12, 2013 Report Share Posted March 12, 2013 Ok if you made a mold using clay and bisque fired it and then sprayed it with oil and clay is sticking -just rebisque fire it to burn oil off. Then only use corn starch or talc as a release as noted in above post-no more oil. Mark Link to comment Share on other sites More sharing options...
sad duck Posted March 13, 2013 Author Report Share Posted March 13, 2013 Thanks I will try the corn starch. [q uote name=sad duck' date='11 March 2013 - 03:35 PM' timestamp='1363034119' post='30761] I have made several molds and I'm having trouble with them sticking! Earthenware clay bisked it,using Earthenware clay. I put spray cooking oil on the mold, still sticks! Any one know what I'm not doing right? Sad Mud! I use metal and glass and one old two-piece plaster mold, all as press molds. I use plain ol' Argo Corn Starch, brushed into all the little parts of the design and so far it has worked great. Any corn starch left on the piece cooks off in the bisque firing. I used a cheap cooking spray on a metal mold when I first started using it. It stayed sticky after many uses, so I just started brushing corn starch over it and keep on using it. Maybe the earthenware is still too porous to use for a mold. I'm not knowledgeable about earthenware, but someone is certain to give you a better answer soon! Link to comment Share on other sites More sharing options...
sad duck Posted March 13, 2013 Author Report Share Posted March 13, 2013 Yes that is what I did, thought I was doing the right thing so would not stick! Thank so much! Will follow your instructions!! Ok if you made a mold using clay and bisque fired it and then sprayed it with oil and clay is sticking -just rebisque fire it to burn oil off. Then only use corn starch or talc as a release as noted in above post-no more oil. Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.