HEPA vacuum for studio
Posted 25 February 2013 - 01:34 PM
Posted 25 February 2013 - 06:33 PM
I am regularly sweeping and wet mopping my 400 sf garage studio. I am aware that a lot of clay dust gets airborne. Can anyone recommend a good shop vac with HEPA filter to use instead of sweeping?
wet mopping is the best way to clean the studio in terms of health.... A really good HEPA vac would likely work, you're looking at around 500.00 for the vac itself, and sometimes as much as 300.00 for replacement filters... Also I would suspect that with the quantity of dust you will be moving through the vac you'll go through filters like nobody's business... Any non hepa vac (like those irobots) will just throw dust back into the air--bad bad bad. wet mop, rinse, lather, repeat.
Posted 16 March 2013 - 08:06 PM
The way I think is best to vacuum, is to have the vacuum unit outside, for my shop and studio I us a shop vac with a 50 foot hose and commercial style wand. I put the vacuum outside or just in the doorway with the exhaust pointing out, no issues with dust at all, except when emptying the vacuum, I wear a good respirator, and empty the vac outside.
For about $200. you can have the complete system, attached is a picture of my system, a link to WalVac, which is where I got my hose and wand and a link to ebay to show some hose availability, I did have to make an adapter for the hose to the vacuum, also pictured.
For a 50' hose it should be a 1-1/2" ID hose, and commercial wand, for a 30' hose, 1-1/4" ID and household wand will work. The paper filter that my vacuum came with works quite well, and has lasted a long time.
The more powerful the vacuum the better for these long hoses.
Posted 17 March 2013 - 03:15 PM
Posted 25 March 2013 - 02:08 PM
Compare Nilfisk Eliminator I Vacuum Our Price: $725.00 http://www.sheffield...pping_Small.gif http://www.sheffield-pottery.com/v/vspfiles/templates/4/images/buttons/btn_addtocart_small.gif
NILFISK ELIMINATOR I VACUUM http://www.sheffield-pottery.com/v/vspfiles/templates/4/images/Bullet_MoreInfo.gif
Posted 02 April 2013 - 02:12 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users