Jump to content
Sign in to follow this  
clay lover

gerstly borate

Recommended Posts

clay lover    133

While I am fine with mixing the glazes I use, I am not so sharp about understanding all the intermixed effects of different ingredients.

 

I have been having some pitting issues, and have been through the standard treatments, soaking longer, thinner application, firing hotter, bisquing hotter, no changes. Then a potter suggested that the gerstly borate in the glazes might be the issue.

 

Do any of you smart glaze folks have anything to offer on this subject? What percentage of GB can a glaze have before the pitting problem comes up? Is the substitute for it, Gelespie B, equivalent in the mix, or will it produce a different glaze?

Share this post


Link to post
Share on other sites
TJR    359

Gerstly Borate is not your issue in my opinion. Some low fire glazes have 75% gerstly and work fine.

Have you considered dust particles? I sand my pots, then I bisque. After the bisque there is dust on the pots. I dip them in a 5 gallon pail of water. Let dry over night. Then you are ready to go.

TJR.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×