cstovin Posted January 9, 2013 Report Share Posted January 9, 2013 This is going to seem funny to most people...I just started adding texture to some of my slab pottery. What I am using for example is a thin piece of leather that was machine embossed. The down side is that the piece of leather doesn't have very deep impressions, but does leave enough texture to leave nice markings on my pottery. The problem is though, for example, when you attempt to do something with the slab, and have to use a sponge, (example when pushing a seam together) how do you keep the texture from being removed from using the sponge? This seems pretty basic - the only thing I can think of is that my texture isn't deep enough, but it would still get messed up by having to use a sponge to sponge over it. I was making a wall vase yesterday and the bottom side of my clay started to crack a little, I thought it was still pretty wet, but obviously to smooth those out...out went the texture! Any suggestions would be appreciated - I haven't don't much with textures! Charlene Link to comment Share on other sites More sharing options...
macdoodle Posted January 9, 2013 Report Share Posted January 9, 2013 from a back issue - http://ceramicartsdaily.org/bookstore/what-if-explorations-with-texture-and-soft-slabs/ Link to comment Share on other sites More sharing options...
cstovin Posted January 10, 2013 Author Report Share Posted January 10, 2013 from a back issue - http://ceramicartsda...and-soft-slabs/ Thank you, but I can't afford to buy the videos right now - but they look great! Link to comment Share on other sites More sharing options...
weeble Posted January 10, 2013 Report Share Posted January 10, 2013 You don't have to buy anything, just scroll down the page and view the clip. Basically, when you're pushing a seam together, try using your fingers instead of a sponge and be careful of the design. Getting your slab the proper dryness for the manipulation you have to do is a matter of practice, and sometimes using a bit of plastic to retard drying in one area and a hair dryer to speed it in another. Link to comment Share on other sites More sharing options...
Chris Campbell Posted January 10, 2013 Report Share Posted January 10, 2013 Number one thing is you do not have to use a sponge. I have never used one in all the years I have been hand building. If you use your bare hands you will get a better feel for what is happening and learn about touch and pressure. You loose the immediacy of this when you put a soft sponge between you and the clay. Your texture might be too shallow but there is a lot of work made with light textures ... you just might need to slow down and really pay attention to your whole joining process. Link to comment Share on other sites More sharing options...
macdoodle Posted January 10, 2013 Report Share Posted January 10, 2013 besides watching the free excerpts shown below the for purchase CDs and books Support your local library. They have tons of info they bought so you can access it for free. I have very limited income, so I like to take books out and see if they are something I'd want to refer back to before I buy them. Link to comment Share on other sites More sharing options...
cstovin Posted January 13, 2013 Author Report Share Posted January 13, 2013 Thank you I went to the library today and got a book; and I am going to try working without the sponge. I can't watch the clip on the referenced page - something is wrong with my download of Adobe; have tried reinstalling it several times and it still won't work - so will have to get that looked at - thanks again Link to comment Share on other sites More sharing options...
macdoodle Posted January 13, 2013 Report Share Posted January 13, 2013 Happy reading -and working it out! If you use Firefox - https://support.mozilla.org/en-US/kb/adobe-flash-plugin-has-crashed or use http://mzl.la/LIoF7y Next to the picture and word Firefox adjust for your operating system if needed. Link to comment Share on other sites More sharing options...
Chantay Posted January 13, 2013 Report Share Posted January 13, 2013 I had a time when I couldn't view videos. I had downloaded and repeatedly tried to install the updated Adobe. Still wouldn't work. After I down loaded firefox, It finally worked. -chantay Link to comment Share on other sites More sharing options...
Lucille Oka Posted January 15, 2013 Report Share Posted January 15, 2013 When next you go to the library see if you can get a copy of this book or if not, it maybe available as an interlibrary loan. It is however available at Amazon.com. Making Pottery Without a Wheel; texture and form in clay [by] F. Carlton Ball and Janice Lovoos, Publisher:Reinhold, New York [1965] This book concentrates on using textures for hand building clay forms. It is an older book but the information is timeless. Link to comment Share on other sites More sharing options...
Isculpt Posted January 16, 2013 Report Share Posted January 16, 2013 The book that Lucille referred to, Making Pottery Without A Wheel; Texture and Form in Clay, is available at AbeBooks.com for prices ranging from $4.35 including shipping to over $100. If you don't mind used books, AbeBooks is a goldmine. They are my go-to bookstore for books on pottery, with prices that usually (though not always) beat their competitors. Thanks to Lucille's suggestion, I just ordered a used copy of Making Pottery Without a Wheel rated "Very Good", which is usually darned near new, for $6.44 including shipping. Thanks, Lucille! Jayne Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.