I’m an amateur, and it shows.
Posted 08 December 2012 - 12:53 AM
Posted 08 December 2012 - 09:25 AM
SO maybe you did go slightly hotter than recommended. Did you have the lid closed? If your kiln is vented, this may not be necessary.
Lusters really stink. They are very toxic. You need good ventilation and better yet, don't be near the kiln room when firing.
Posted 08 December 2012 - 11:03 AM
Posted 08 December 2012 - 12:45 PM
It says you can burn off the metallic buy firing to 06. Do a test with one of the pots and use witness cones to make sure your firing to 019-018.
Posted 11 December 2012 - 02:32 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users