PotteryWooly Posted November 24, 2012 Report Share Posted November 24, 2012 Anyone out there ever disassembled a Lockerbie Kick Wheel? I sure would appreciate any directions on how to disassemble the wheel head, shaft, and bearings. The top and bottom bearings on mine need to be replaced. Even after removing all the set screws I cannot get the wheel head to come off. My wheel dates back to mid-1960s to mid-1970s. Thanks! Link to comment Share on other sites More sharing options...
Mark C. Posted November 25, 2012 Report Share Posted November 25, 2012 I have no idea but if I was to the point you are I'd call the folks who still sell them-thats Laguna Clay Co-try either location . Laguna Clay City of Industry, CA 91746 or Byesville, OH 43723If that does not work try a bigger hammer or a bearing puller-do not injure the shaft-the bearings can be ordered from any auto or bearing store.You want sealed bearings.Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.