Jump to content


Photo
- - - - -

How do you disassemble a Lockerbie Kick Wheel?


  • Please log in to reply
1 reply to this topic

#1 PotteryWooly

PotteryWooly

    Newbie

  • Members
  • Pip
  • 2 posts

Posted 24 November 2012 - 06:54 PM

Anyone out there ever disassembled a Lockerbie Kick Wheel? I sure would appreciate any directions on how to disassemble the wheel head, shaft, and bearings. The top and bottom bearings on mine need to be replaced. Even after removing all the set screws I cannot get the wheel head to come off. My wheel dates back to mid-1960s to mid-1970s. Thanks!

#2 Mark C.

Mark C.

    Advanced Member

  • Members
  • PipPipPip
  • 2,711 posts
  • LocationNear Arcata Ca-redwood rain forest

Posted 24 November 2012 - 07:42 PM

I have no idea but if I was to the point you are I'd call the folks who still sell them-thats Laguna Clay Co-try either location .
Laguna Clay City of Industry, CA 91746 or Byesville, OH 43723If that does not work try a bigger hammer or a bearing puller-do not injure the shaft-the bearings can be ordered from any auto or bearing store.You want sealed bearings.Mark
Mark Cortright
www.liscomhillpottery.com




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users