DonaldDog Posted June 9, 2019 Report Share Posted June 9, 2019 Hi guys i am looking at buying a second hand kiln and have little experience with them. There is a Paragon DTC 800C available very cheaply, but it hasn’t been used for 10 years and the seller suggests the elements will probably need replacing. I don’t seem to be able to find elements available online anywhere. Does anyone know if this is a model that I have any hope of getting parts for, or is this just something i should let go . thanks Don Link to comment Share on other sites More sharing options...
Bill Kielb Posted June 9, 2019 Report Share Posted June 9, 2019 The 800 DTC is a controller model not a kiln model produced by paragon I believe. I would suggest you get the actual kiln model and as many pictures as possible to review prior to purchase. FYI the manual is available for download online Link to comment Share on other sites More sharing options...
DonaldDog Posted June 9, 2019 Author Report Share Posted June 9, 2019 Ok. Thanks. I’ll try to find out the model of kiln. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.