Jump to content
cbarnes

Studio Floorplan design

Recommended Posts

Hi All,

My husband is gathering ideas to build me my dream studio for our retirement property.    I'd love any input you have on what works/ doesnt work in your studios.  He's thinking a different bay for each phase

1. wheel and wet work (roll up door maybe to be able to pressure wash out.  i really hate the clean up part of party)

2. kiln & bisque shelving

3. painting / finished piece storage

we weren't sure about making glazes , havent done that yet, and if you need isolated area as to not have dust from the chemicals around.  i have animals that we dont want to have walking through that stuff.

 

thanks! 

 

 

 

Share this post


Link to post
Share on other sites

welcome to the wonderful world of having a studio of your own design!

several years ago there was a discussion here of what kind of studio do you have.   lots of pictures of many different kinds of work spaces.  designs for heavy slab work with lots of flat table space, many wheel workers with gobs of shelving.    you might want to look for that somehow in the search posted at the top of the forum page.   also visit as many studios as you can to see how others have done it.   it is studio tour time so get out there and look.   ask if you can take photos and be upfront with your reasons.   a few  potters may think you are stealing their pottery designs.

check out GEPs excellent basement studio setup at her website.  find her avatar and signature to locate it.

marcia selsor has a great setup for her work which includes her recent addition of a kiln shed ( read palace) in montana.

there is also a book on studio design that you might find online or in your local library.

get wheels, lots of wheels for equipment, storage and heavy buckets of glaze.  get a really good quality mop and bucket that has rollers to squeeze the water out.   and make sure you have a sink that can handle large buckets.  

mostly, have fun working together.   

Share this post


Link to post
Share on other sites

If this is the forever setup I would do two studios with a catwalk and nice decking between the 2 and an outdoor storage. That's where we were going with ours in the NW on an acre property. I built a 300 ft studio (12x26) for everything but glaze and would make it 14 wide if doing again, it had 2 wheels lots of shelving, recirculating Cink, slab roller and bisque kiln. We used the garage for all glazing and glaze firing. I was going to build another building with a catwalk between them and more decking. Having the kilns out of the work area was great so I recommend considering that. You can also really spread out with glazing and have that area always ready to go.

Share this post


Link to post
Share on other sites

In the professional world-the studio is laid out for workflow. That is clay flows in thru the various work stations (wedging-throwing-trimming) then onto bisque and glaze fires to pricing/packing and put to sales. For hobbist I'm not sure this is as important as the end point is not the same as the qaunities are so much less.

Just lay it out for what makes sense to you depending on what you are planning on doing with clay.

You can make glazes and still keep it clean.Making your own glazes means you are learning more about the whole process and will have way more control on finished products.

Edited by Mark C.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use.