MisterP Posted August 23, 2018 Report Share Posted August 23, 2018 Ok, anyone know what the heck size the allen wrench needed to adjust the attachable seat? Seems I have tried everything under the sun and can't find one that fits. Link to comment Share on other sites More sharing options...
Mark C. Posted August 23, 2018 Report Share Posted August 23, 2018 No idea as I never have seen one. Its not metric thats for sure-I'll check my Brent extruder as they most likely use the same Allen screws on all their stuff. Link to comment Share on other sites More sharing options...
MisterP Posted August 23, 2018 Author Report Share Posted August 23, 2018 Thanks Mark, Let me know if you figure it out. Link to comment Share on other sites More sharing options...
Mark C. Posted August 23, 2018 Report Share Posted August 23, 2018 5/16th-brent uses that on their extruders and my guess is all other equipment .Not much too figuring -I have about 70 Allen wrenches at least-1/3 are metric. its one of the largest size in this set https://www.amazon.com/Bondhus-20899-Balldriver-GoldGuard-L-Wrench/dp/B000EB850M/ref=sr_1_5?ie=UTF8&qid=1535060425&sr=8-5&keywords=gold+allen+wrench+set Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.