Jump to content

Recommended Posts

4 hours ago, Rae Reich said:

Mercury deposits as by-products, you think? Or deliberate installation? 

This is a very curious puzzle. 

I have a suspicion it's the end product of the reaction after a long time being used as a distribution. The info is here and their mixed in with a lot of bull )-

I'm starting to think when the old clay started to crack, the "now" mercury leaked. 

 

 

Share this post


Link to post
Share on other sites
4 hours ago, Rae Reich said:

Have you considered fuming to get the metals deposited? Don't know how "thick" you need the layer, but if it needs to be recoated after use that might work.

I don't know anything about fuming .. think it will work needed like this? 

testing.png

Share this post


Link to post
Share on other sites

Looking into fuming I have an electric kiln so I don't think I can do it as its explained. 

,also with so many different metals in a small area I don't know how to keep them separated other then to add the dust to the plug areas. 

when the microwave starts its baby tornado vortex within the voids and holes  all the walls getting hit may instantaneously react if everything is a smooth solid metal vs a clay separated mix. micro dust in-bedded " hopefully' will allow a very slow reaction to each wall area slowed down even more by the gallium bath .

With the wave passing through the clay and bouncing off the copper also microwaves not reacting much with mercury... a pellet of each iron and magnesium mixed with clay "separated ppm"  I'm hopping will allow a long and steady reaction. 

On the other hand telling anyone its built  and tested  to see if it works may not be a good idea with the deep state still running the show, we just keep tinkering for now.~

Edited by Trout

Share this post


Link to post
Share on other sites

Going to be a interesting  winter~

Looking to build a one way valve assembly. just a check ball  and maybe a way to replace them and the pellets . maybe a way to clamp all the parts together or just snug fit if something go's wrong.

tinkering .

 

Share this post


Link to post
Share on other sites
5 hours ago, Babs said:

Better in my post should have read Hatter   auto prompt wins again. 

 

lol its ok, auto dose it to me all the time lol i understood 

With the 40 or so in here now its best to leave cookie cutter parts list to look at. as much as I would like to push this, its just not the right time yet. we need to wait for the good guys to un-trench the bad guys.

The only real way to prove something like this in todays world would draw in the worst of the worst. 

Share this post


Link to post
Share on other sites
4 hours ago, preeta said:

Trout isn’t that storms on Jupiter?

yes, the only planet that makes 3 time more power then the sun sends it. its whats under the storm doing that?

red dust /EMP fields/  if a storm like that was loose within the earths magnetic's it wold be the aura of all time~

grab a pic from nasa photo's and download it , use the zoom and get in close . Seems even with their hands tied they are trying to let some info out, you only need an understanding of what your looking for. The twirling~

After you see all of them think about why, its almost as if the planet has hundreds of reactors running,, like the planet is in a state of terraforming, heating the core slowly so it will not explode but enough to start a volcanic reaction, if that starts, the magnetic dust and ash would charge like volcanic lightning ect...ect ect...

Whats under each of the vortex ? 

 

Edited by Trout

Share this post


Link to post
Share on other sites

If you could guess what the makeup of this rock was before... when it was first built, what do you think the mix of clay's would be before it was electro statically discharged ? The more you dig the more you will not be happy. The core of engineers report and then flooding everything should tell a story  in its self..

waffle-rock-16.jpg

Share this post


Link to post
Share on other sites

Or a bit of knowledge and a lot of "it depends "with a slash of paranoia.  And I'll be the one to save it all.......

Interesting but decrypting the crap would help.

Really want to know How, ask specific direct questions directly lin k ed to job in hand.

Great ceramist in the mix. But wouldn't spend time to decipher what proverbial floats from the solids

Share this post


Link to post
Share on other sites

Just so there is no misunderstanding. If you look up whats going on in japans meltdown reactor, you will see they have no way to stop it. as it digs it way down to the core.  maybe this will help with that but I don't know how~yet. Yappy-You should do some more reading before you call me any more names~ 

Troutman

 

Share this post


Link to post
Share on other sites

I will not repost your screen shot~

But understanding that a mod is willing... I will quit posting.

For the others, I did get what I came for, I think I understand why things always crack. pic~

Best I leave now before. 

Clayton Troutman lol yup its my real name ~

It was fun talking with you.

 

base 3pole mag.jpg

mags.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use.