Reggie_dog_lover Posted June 27, 2018 Report Share Posted June 27, 2018 Oops! I forgot to put a clear overglaze over my underglaze. Can I put overglaze on and re-fire? Link to comment Share on other sites More sharing options...
Pres Posted June 27, 2018 Report Share Posted June 27, 2018 If the surface is smooth, you should be able to do the glaze over. How are you applying? Brushing will require some work, but is probably the same as bisque or pretty close, Spraying will work well as long as you don't saturate, and dipping may take heating up the pot in the oven a bit before dipping. best, Pres Link to comment Share on other sites More sharing options...
Reggie_dog_lover Posted June 28, 2018 Author Report Share Posted June 28, 2018 Surface is not smooth - I did some incising on the underglaze and the pot when it was leather hard. I would ideally be brushing the over glaze on. Thoughts? Link to comment Share on other sites More sharing options...
Pres Posted June 28, 2018 Report Share Posted June 28, 2018 Should be fine. best, Pres Link to comment Share on other sites More sharing options...
Reggie_dog_lover Posted June 28, 2018 Author Report Share Posted June 28, 2018 Thank you so much! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.