Babs Posted June 26, 2018 Report Share Posted June 26, 2018 My Shimpo pugmill NVA 07 manual has gone walkabout. I have googled trying to locate help but no luck. Wondering if anyone can give me some leads on this. My oil pressure gauge is playing up and as it is a vintage piece, don' want to spend $ on it. I am finding it way too heavy to dismantle it these days. would rather invest in a slab roller maybe Link to comment Share on other sites More sharing options...
dhPotter Posted June 26, 2018 Report Share Posted June 26, 2018 Babs you may have already downloaded this ---> http://www.shimpoceramics.com/support.html <---scroll down about half way, Under Pugmills is an entry for NVA-07 & NVA-15. It says not available at this time, but it really is. I was able to download a .pdf. Link to comment Share on other sites More sharing options...
Babs Posted June 26, 2018 Author Report Share Posted June 26, 2018 thanks so just go there and then to resources I guess? Link to comment Share on other sites More sharing options...
Babs Posted June 26, 2018 Author Report Share Posted June 26, 2018 thanks DH got it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.