Jump to content

Bisque Dilemma


LeeU

Recommended Posts

Here is the thing:  I have 4.4 cubic feet of kiln to fill (L&L 23 easy fire).  I must bisque only 3-4 small pieces of raku clay for a simple demo, bisque 1/2 shelf of cone 10 clay for an anagama wood fire, fire 1/2 shelf of unglazed 05 clay, either as bisque or as “done”, and fire 1/2 shelf of unglazed green ^6.  The latter is being used primarily as filler because I will not have anywhere near enough pieces to fill the kiln even once--the total is only about half a kiln load.  I will use shelf supports and firebrick for the rest of the filler.  My question is this:  is there a low fire cone number to which I could fire ALL of these in one shot for the purpose of bisquing them sufficiently for their later fires?  

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.