Jump to content

Searching For" Making Bisque Hump Moulds"


Recommended Posts

I'm having trouble getting anywhere with this search. Not so very long ago there was a thread on making hump moulds from bisque slabs instead of plaster, with suggestions of how thick , etc. Do any of you remember who started it, or how to find it? Search mode just sent me in circles. TIA

Link to comment
Share on other sites

Hi,

 

I made one that was only 1cm thick and that has seemed to work. Albeit the mould is not very high at approx 2", if I was to make another higher one I would probably have it a little thicker. Whether this is technically correct I have no idea but it worked for me. Made from Buff clay C08. Hope that helps.

Link to comment
Share on other sites

http://community.ceramicartsdaily.org/topic/15892-plates-slump-hump/?hl=%2Bbisque+%2Bmolds&do=findComment&comment=123338

 

When searching, go to the main forum page and search; your search will go across all of the forums.  If you search within a forum (not main forum page), your search will be limited to only that forum. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.