Jstock673 Posted May 25, 2017 Report Share Posted May 25, 2017 I did a couple urns last week and I loved the outcome just one side was gray and dull. I decided to experiment a little bit and I added some acrylic paint to the surface. I think it looks really nice! I just wonder if there is anything I can add to the surface to protect it or coat the paint? Link to comment Share on other sites More sharing options...
Marcia Selsor Posted May 26, 2017 Report Share Posted May 26, 2017 I'd try a propane torch first. Much more likely to integrate much better with the whole pot. Marcia Link to comment Share on other sites More sharing options...
Marcia Selsor Posted May 26, 2017 Report Share Posted May 26, 2017 I was referring to touching up the color. To seal the surface from re-oxidation, use a clear acrylic spray lightly. The metallic reflection can change if you use too much. Marcia Link to comment Share on other sites More sharing options...
Jstock673 Posted May 26, 2017 Author Report Share Posted May 26, 2017 I was referring to touching up the color. To seal the surface from re-oxidation, use a clear acrylic spray lightly. The metallic reflection can change if you use too much. Marcia Thank you I will try that Link to comment Share on other sites More sharing options...
Marcia Selsor Posted May 26, 2017 Report Share Posted May 26, 2017 Be sure to use the UV resistant clear coat. Marcia Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.