Jump to content
Sign in to follow this  
djk_brook

Glaze Spray Booth Exhaust Fan

Recommended Posts

The exhaust fan in the ceramic glaze spray shed has failed at my local Arts Center. The fan had an open motor and the spray had clogged up and shorted out the motor. What the old one is is a 10 inch inline duct fan. That unit is no longer being manufactured so I need to get it replaced with something comparable. I have seen some fans available on the internet but they are different and are very expensive. So, I'm checking with others on this forum for recommendations. I'll either be looking for an affordable replacement fan for the old one that failed. Or come up with some other DIY solution for exhausting ceramic glaze in a spray booth. Recommendations?

Share this post


Link to post
Share on other sites

I suggest one of those mesh washable filters in front of fan and motor-they usually are blue and you can cut them to fit your application . They are about 1 inch thick and are made for central home heaters-they are sold where disposable heater filters are sold. You can buy them here as well.

https://www.amazon.com/gp/product/B01MR6HE7I/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

I just bought some for my central vac studio system.I cut mine into 12 inch circles.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.