glazenerd Posted March 12, 2017 Report Share Posted March 12, 2017 I would appreciate some links to technical information or videos showing the process of making two-piece molds. I have done many regular molds; so I am not unfamiliar with the process. To be more specific; making large two piece press molds.........very large. like 40" x 30" large. Building my own ram press is not an issue either. Nerd Link to comment Share on other sites More sharing options...
LeeU Posted March 13, 2017 Report Share Posted March 13, 2017 I got nuthin! (looking forward to the replies.) Link to comment Share on other sites More sharing options...
mdobay Posted March 13, 2017 Report Share Posted March 13, 2017 Assuming you have already youtube'd it? not sure if this is what you need. https://www.youtube.com/watch?v=4mBWZ23kcXc Link to comment Share on other sites More sharing options...
glazenerd Posted March 13, 2017 Author Report Share Posted March 13, 2017 TY Mdo.. That certainly put me in the right direction. Others came up, that showed much larger molds - 30-60".. which is more in line with where I want to go. I knew reinforcing mesh would be needed; but was not exactly sure about the placement. Did a forum search, those likewise were for the usual pottery mold system/s. Again TY. Nerd Link to comment Share on other sites More sharing options...
Chilly Posted March 13, 2017 Report Share Posted March 13, 2017 Did you see the video of the Horny Toad Mold? It came up on the right-hand side. https://www.youtube.com/watch?v=C-iVrtfWDHQ A good way of making a two part model. Link to comment Share on other sites More sharing options...
glazenerd Posted March 14, 2017 Author Report Share Posted March 14, 2017 Chilly: Cute little toad it was. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.