Jump to content
Sign in to follow this  
tanvi504

Kiln Setup - L&l Easy Fire

Recommended Posts

tanvi504    3

I just bought an easy fire e18s kiln. I was going to do a test fire. I have one question. The instruction manual talks about spring hinges and things. We didnt disassemble the kiln. Do we need to follow any of these steps? We simply assembled the stand and placed the kiln on top. Am I ready for test fire?

Share this post


Link to post
Share on other sites
neilestrick    1,378

That kiln does not have the spring hinges. It doesn't need them since it's so small. You do need to make sure that the kiln is not rocking on the stand. Put sheet metal shims under the feet of the stand as needed to get it sitting evenly on all feet. Open the control panel and make sure all the connections are still tight. Make sure all the elements are seated into the holders, especially at the corners. Then you're ready to fire.

Share this post


Link to post
Share on other sites
LeeU    328

You will love this kiln, and the ease of programmng...I have a larger one and it just floats my boat to happy places. (and thanks Neil for your help along the way)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×