preeta Posted July 18, 2016 Report Share Posted July 18, 2016 So i would like to make a garden planter that looks like a pile of rocks -little rocks - succulents are growing out of. Kinda like voluntary plants growing out of a rocky rubbish heap. It is going to be hand built with bmix with grog (using up my last clay leftover) glazed to ^5. So i am going to have lots of uneven areas. Quarter inch to 3/4 inch thick. I'll poke holes in the very thick areas and apply wax to the thin areas. I was going to cover with plastic for a week to slow dry it. I want to avoid cracks at bisque or/and glaze fire. Is there anything else i should be considering? I am still working on the design. Should the thicker area be made a day earlier? Any thoughts would be most welcome. Link to comment Share on other sites More sharing options...
bciskepottery Posted July 18, 2016 Report Share Posted July 18, 2016 What size of planter are you contemplating . . . the overall, end-size? Consider making a series of smaller rocks from pinch pots and then assemble. That would allow a more uniform wall. You could assemble at soft leatherhard with slip and coils or glue together after glaze firing with adhesive. Link to comment Share on other sites More sharing options...
glazenerd Posted July 18, 2016 Report Share Posted July 18, 2016 What Bruce said... with a firing thought. If you do fire as an assembled unit: 1. fire very slowly. 2. put some silica under it so it can move during inversion. Nerd Link to comment Share on other sites More sharing options...
Chilly Posted July 19, 2016 Report Share Posted July 19, 2016 I was going to cover with plastic for a week to slow dry it. A week or two or three or more, depending on your climate. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.