Missy Posted November 10, 2015 Report Share Posted November 10, 2015 Hi- any suggestions on a readily available adherent to glue glass to a glazed piece? I'm trying to put stained glass inside an incised piece that will be hanging upside down so it will really need to stick well and defy gravity. Thanks! Link to comment Share on other sites More sharing options...
ronfire Posted November 10, 2015 Report Share Posted November 10, 2015 I find Epoxy will stick well to glass Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted November 10, 2015 Report Share Posted November 10, 2015 If you have access to UV glue, it works a treat. You can get it from automotive places. Link to comment Share on other sites More sharing options...
Colby Charpentier Posted November 10, 2015 Report Share Posted November 10, 2015 UV glue needs clear glass to permit light transmition for the curing process. It also tends to require polished surfaces to create a strong bond. If you can take care of those obstacles, UV is workable. Most epoxies aren't great for the long term, but will hold up so long as they're not in direct sunlight. Opaque expoxies tend to fare better in sunlight. Link to comment Share on other sites More sharing options...
Mark C. Posted November 10, 2015 Report Share Posted November 10, 2015 E6000 glue for glass to glaze surfaces-sold and most hardware stores. Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.