Ally Posted November 8, 2015 Report Share Posted November 8, 2015 Can anyone help with how to use a kiln I have acquired. It is an electric manual as far as I can tell Potterycrafts p5151 240v, 3kw On the kiln is a dial 1-100 - with no guide as to what it does. Separate but wired into kiln (can be fixed to a wall) is a dial to change between 1-1400 (temp) and also a switch which can be set to limit or soak. I can't find much help online for this so though someone might have an idea on which each dial does! Thanks! Link to comment Share on other sites More sharing options...
Chilly Posted November 8, 2015 Report Share Posted November 8, 2015 I'd give Potterycrafts a ring, they're usually quite helpful. Also, if you can post some pictures........ (I have a Potterycrafts kiln that came with a manual controller, but sounds different to yours. I've since upgraded to a computerised controller, but the original was so easy to work out, it didn't need any instructions.) Link to comment Share on other sites More sharing options...
High Bridge Pottery Posted November 8, 2015 Report Share Posted November 8, 2015 Sounds like you can either set a temperature for it to turn of or soak at and a power switch. Why not set it to 100 temp and either of the two options, crank the other dial up and see what happens. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.