jrgpots Posted September 8, 2015 Report Share Posted September 8, 2015 I live on top of red sand dunes. They are just down the road. I want to use the red sand in a "local" glaze. What would be most effecient way to separate out the 200 mesh grains? I thought about 1. washing the sand through filter material to collect the smaller particles. 2. Aerosolize And collect the dust through a filter. (Not my first choice.) 3. ball mill the sand. 4. Your idea. help, Jed Link to comment Share on other sites More sharing options...
Mark C. Posted September 8, 2015 Report Share Posted September 8, 2015 200 mesh screen should work fine. Mark Link to comment Share on other sites More sharing options...
rayaldridge Posted September 8, 2015 Report Share Posted September 8, 2015 Are you sure there is a fine fraction? Some sand doesn't have that much dust. You don't really need 200 mesh material to add it to a glaze-- something a little coarser will still work, especially in an active glaze. My first thought was that perhaps you can use a sluice box to remove the heavier grains, if the fine fraction is light enough to be carried in flowing water. Run a sandy volume of water through the sluice box and collect the water that makes it to the bottom, dry it out, and use. This is purely theoretical, I hasten to add. I don't know if it would really work. Link to comment Share on other sites More sharing options...
jrgpots Posted September 8, 2015 Author Report Share Posted September 8, 2015 200 mesh screen should work fine. Mark Screen it wet or dry? Jed Link to comment Share on other sites More sharing options...
jrgpots Posted September 8, 2015 Author Report Share Posted September 8, 2015 Are you sure there is a fine fraction? Some sand doesn't have that much dust. You don't really need 200 mesh material to add it to a glaze-- something a little coarser will still work, especially in an active glaze. My first thought was that perhaps you can use a sluice box to remove the heavier grains, if the fine fraction is light enough to be carried in flowing water. Run a sandy volume of water through the sluice box and collect the water that makes it to the bottom, dry it out, and use. This is purely theoretical, I hasten to add. I don't know if it would really work. The sand is suppose to have 20-30% 200 mesh or smaller particles. The local geotech guru assures me it is there. Jed Link to comment Share on other sites More sharing options...
Mark C. Posted September 8, 2015 Report Share Posted September 8, 2015 My answer was if you want 200 mesh material dry sieve it with 200 mesh screen-if its something else like 20% in the same mix I'm out of ideas. I use 200 mesh and 325 mesh materials almost every week. They are all dry when I get them in bags. If you are washing to get the big stuff out gather the floaters and sieve them wet as they are wet at that point.This will take some water running. For some reason I thought this sand was dry when collected?Dry will be easier good luck Mark Link to comment Share on other sites More sharing options...
PeterH Posted September 8, 2015 Report Share Posted September 8, 2015 The sand is suppose to have 20-30% 200 mesh or smaller particles. That leaves 70-80% to sieve out. Maybe worth considering taking out some of this fraction with a larger/coarser/stronger sieve. This might also help break down any larger clumps before meeting the 200 mesh sieve. Link to comment Share on other sites More sharing options...
Mark C. Posted September 8, 2015 Report Share Posted September 8, 2015 good idea from Peter-screen it down-start with a 40-80 and then a 100 or finer. Mark Link to comment Share on other sites More sharing options...
jrgpots Posted September 8, 2015 Author Report Share Posted September 8, 2015 I will do the stepped sieve approach. The sand as dry as could be with no clumps. The majority of the grains are small to start with (about 40 mesh) and a beatiful orange color from iron oxide. It comes from thered sandstone in the area. I'm curious to see what type of base glaze I can make with it. Thanks for your help. Jed Link to comment Share on other sites More sharing options...
oldlady Posted September 8, 2015 Report Share Posted September 8, 2015 once you have the sand at the proper size, how will you use it in a glaze, as a substitute for the silica? Link to comment Share on other sites More sharing options...
jrgpots Posted September 9, 2015 Author Report Share Posted September 9, 2015 once you have the sand at the proper size, how will you use it in a glaze, as a substitute for the silica? Yes, I will substitute it for silica. At least that's the starting point. I think it has about 2 to 4% iron oxide. I think it will melt to an amber transparent glass... It's fun to play. Jed Link to comment Share on other sites More sharing options...
jrgpots Posted September 13, 2015 Author Report Share Posted September 13, 2015 I screened to my heart's delight. Most of the sand is 80-100 mesh size. So, how will this affect the melt and how can I adjust the glaze to anticipate this? Jed Link to comment Share on other sites More sharing options...
Mark C. Posted September 13, 2015 Report Share Posted September 13, 2015 You will need to ball mill it down-large particle sizes melt less . I notice a difference between 200 and 325 silica in glaze melts. Mark Link to comment Share on other sites More sharing options...
jrgpots Posted September 13, 2015 Author Report Share Posted September 13, 2015 Mark, you were suppose to give me great secret info from your vast knowledge and experience, a magic bullet, that was to get me out of this jam..... OK,,,,I'll be filling the ball mill and then sieve the remains. Jed Link to comment Share on other sites More sharing options...
High Bridge Pottery Posted September 13, 2015 Report Share Posted September 13, 2015 Test out both the raw and ball milled to see what differences you get Link to comment Share on other sites More sharing options...
jrgpots Posted September 13, 2015 Author Report Share Posted September 13, 2015 I just started the mill.....But, When mixing the glaze with the 100 mesh sand, would you add extra bentonite and mix it thicker to keep the larger particles in suspension? Jed Link to comment Share on other sites More sharing options...
Mark C. Posted September 13, 2015 Report Share Posted September 13, 2015 For me making clay and mining materials was in my distant past-The magic bullet was I was young and had yet to realize all that took time and was murder on my body. Long ago I got the idea that clay and materials where very cheap and the only reason to make my own was total control-but even that was very hard work. I caved long ago and buy my clay and just order what is mined for industrial purpose-This is enough to keep me busy with experimentaion the rest of my ceramic life. Never owned a ball mill and never want to-just a personal thing.Life is short and I choose my battles and milling is not one of them.I have enough of them with glaze making. Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.