Jump to content

neilestrick

Members
  • Content count

    5,296
  • Joined

  • Last visited

About neilestrick

  • Rank
    Neil Estrick

Contact Methods

  • Website URL
    http://www.neilestrickgallery.com

Profile Information

  • Gender
    Male
  • Location
    Grayslake, IL

Recent Profile Visitors

314,297 profile views
  1. Upcoming 300th Firing - Kiln Repairs

    You should be able to get about 150 firings, combined bisque and cone 6, from a set of elements. TC's may last longer. Just check the element resistance at 100 firings with a meter and see where you're at. No sense changing them early if you don't have to.
  2. Upcoming 300th Firing - Kiln Repairs

    Yep, that TC was shot! And no, don't pull it back. Just leave it tight against the end of the tube. Fire away! Imagine if all that black metal from inside the protection tube had shed into your kiln and onto your pots and shelves....
  3. It would be easier and faster to test some clay bodies from other suppliers. Where are you located? We all might be able to make some suggestions for nearby options.
  4. cone 5 clear glaze for Cassius Basaltic

    In what way is it not working?
  5. Have you tested glazes to confirm that they don't work? Could be that the supplier is wrong.
  6. Don't let @glazenerd see this thread or you're in for it! What exactly is the problem with the porcelain you're currently using, and what properties are you hoping to get out of your own formula? The most basic cone 10 porcelain formula is 25% silica, 25% feldspar, 50% kaolin. Going from there, for a cone 6 porcelain you'll have to increase the feldspar to get it to fuse at a lower temperature. You'll also need to add plasticizers to make it more workable. I'm a big fan of VeeGum T, but there are other (cheaper) white bentonites and such that work well, too. The best porcelains use English Grolleg for their koalin. If you plan to have your supplier mix it for you, then you'll first need to find out what materials they keep in their inventory that are available for you to use in your formula. Convincing them to get in certain materials just for your mix will be difficult and expensive. Bear in mind, too, that this will take a long time, like maybe years to get just right. It may be easier to simply try out other porcelain bodies from other suppliers.
  7. Floating Blue is finicky on a good day, so anything you do to it will affect the color. The good thing about floating blue is that the surface it mottled enough that you probably won't notice any crazing, and on a vitrified porcelain you won't have to worry about weeping. Someone more familiar with the glaze will be able to tell you if it even works on porcelain. If I remember correctly it's happiest on brown stoneware bodies. Some glazes rely heavily up their chemistry to create their look, and you can't do much to change them without ruining the thing that makes them great. Others you can change a lot, with little effect on the final result.
  8. Mason Stain in base glazes

    I've been running tests of about 15 different mason stains in a clear base every day for the last 3 weeks. My first round was 4% of the warm colors, 2% of the cold colors. It was a good starting point and gave me many nice results. I've also been blending colors, for instance trying to tone down a very bright yellow, and as little as 0.2% of some browns will have a noticeable effect. A lot will depend on how your base glaze responds to colorants, though.
  9. Genesis Controller

    Just like cell phones! I never know what's happening when my phone updates. I'm betting that 99.9% of the controllers Bartlett sells are sold to the kiln manufacturers, who all have their own manuals. This updating stuff is new to them. It would be nice if they maintained an update list on their web site. The app won't be available for public use for another couple of weeks. They're shooting for November 1st.
  10. Table top fountain design

    I'm not a big fan of running the cord out the bottom and trying to seal the hole with silicone or anything else. It will fail and some point. All it takes is a pull on the cord to make a leak. I've done several where the bottom vessel had a lid, and as the water cascaded down it went through holes in the lid. These were large fountains (3-4 feet tall) that were meant to be outdoors, so the lid kept leaves and critters out of the water. The cord went out of a notch between the lid and bottom vessel.
  11. Raku Questions

    We always fire little stuff or small flat things on a soft brick or piece of kiln shelf and just pull the whole brick or shelf piece.
  12. Genesis Controller

    I love my Genesis! I'm also testing their mobile app. It's just for monitoring the firing, not programming, but that's a good thing-I don't really want my kiln to get hacked. At some point they'll have alerts to your phone if the controller puts up an error code. The best thing about the Genesis is how easy it is to do custom programs. You can see the whole program on the screen at once, instead of just one step at a time, and you can change any part of it without having to scroll through the entire program. You can also do a lot more steps and store a lot more programs, and you can put a name to each program, instead of just a number. Touch screens with wi-fi are the biggest change to happen to kiln controllers in 20+ years. It's a cheap upgrade when you buy the kiln ($125 with L&L, not sure what it is with ConeArt), especially if you math it out over the 20 year life of the kiln. They'll be standard equipment in a couple of years, and buying it as a replacement later will cost you $300.
  13. Homemade Underglaze Trouble

    Underglazes are the one thing where I think it's well worth the money to buy a commercial product. They can go on at any stage- wet, leather hard, bone dry, bisque- they brush on nicely, and generally work great. Many brands are formulating them to work at cone 6, and you can find any color you want. There's always a little testing involved to see how your particular overglaze will affect the color, but that would be true of any homemade underglaze, too. If you watch for sales, you can get commercial underglazes for as little as $5 a pint and they often need to be thinned down making them even cheaper. They are far more versatile than any homemade underglaze.
  14. Raku Proposal For School

    Any time you open the can before it has cooled enough, you risk the gasses inside re-igniting from the inrush of oxygen. Always let it cool until you can take it off without gloves. I've seen soe impressive fireballs come out of raku cans, and caught one in the face once when I was an undergrad.
  15. Recommended electric potter's wheel

    When the whispers first came out you could turn them on full speed and grab the wheel head and stop it. I don't know if they're still like that or not.
×