Roberta12
Members-
Posts
1,291 -
Joined
-
Last visited
Profile Information
-
Location
Colorado
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
Roberta12's Achievements
Advanced Member (3/3)
819
Reputation
-
Roberta12 reacted to a post in a topic: Replacing elements, what are your thoughts?
-
Replacing elements, what are your thoughts?
Roberta12 replied to Roberta12's topic in Equipment Use and Repair
@neilestricke23T cone 5.5, Slow glaze slow bisque Yes, we have a meter. I have not measured. Glaze firings, 15 minutes. -
I have elements and TCs on hand, but I have held off changing them. You can see why from the photo. As expensive as elements are, I have hesitated. The reason they have different firings on them is because there was an issue with the top element. I had glaze on it and it burned out. So I changed just those 2 top elements. The top 2 elements have 73 firings, the bottom elements have 62 The kiln is still running, bisque firings are not extended, glaze firings are a little longer. What would you all do? Change them all out? I can't seem to flip the photo. Sorry.
-
Roberta12 reacted to a post in a topic: Glazed pieces hung out at 800F degrees - ok?
-
Roberta12 reacted to a post in a topic: Bisque firing frustrations
-
Roberta12 reacted to a post in a topic: Bread kloche bisque vs cone 6?
-
Rae Reich reacted to a post in a topic: Bread kloche bisque vs cone 6?
-
neilestrick reacted to a post in a topic: Bread kloche bisque vs cone 6?
-
MKG001 reacted to a post in a topic: Suggestions for pottery tool bag
-
Bread kloche bisque vs cone 6?
Roberta12 replied to Biglou13's topic in Studio Operations and Making Work
@Biglou13I started seriously making sourdough bread 6 weeks ago. Sooooo much fun. I took a class and learned what I had been doing wrong! I use cast iron skillets, aka dutch oven. I would recommend that as well. -
Roberta12 reacted to a post in a topic: Bread kloche bisque vs cone 6?
-
Roberta12 reacted to a post in a topic: PID small kiln
-
Suggestions for pottery tool bag
Roberta12 replied to MKG001's topic in Community Marketplace – Buy/Sell/Trade/Free
I have friends who RAVE about the Soolla bags. -
Rae Reich reacted to a post in a topic: Any thoughts on what is causing my glaze problem?
-
Any thoughts on what is causing my glaze problem?
Roberta12 replied to Bam2015's topic in Clay and Glaze Chemistry
@Bam2015One technique that has helped me is to lightly rub a finger over the underglazed areas, after you have brushed/dipped/sprayed your satin or glossy glaze. I think it is to smooth it out and make sure the glaze covers the ug. -
Roberta12 reacted to a post in a topic: Any thoughts on what is causing my glaze problem?
-
Roberta12 reacted to a gallery image: Dappling Curio Porthos Bisque
-
Roberta12 reacted to a post in a topic: Watercolor painting on greenware clay
-
Roberta12 reacted to a post in a topic: QotW: Slip, Slip with vinegar, Magic Water: What is your choice, and why?
-
Pres reacted to a post in a topic: QotW: Slip, Slip with vinegar, Magic Water: What is your choice, and why?
-
Rae Reich reacted to a post in a topic: QotW: Slip, Slip with vinegar, Magic Water: What is your choice, and why?
-
Hulk reacted to a post in a topic: QotW: Slip, Slip with vinegar, Magic Water: What is your choice, and why?
-
@BeccapLovely glaze! cone 5/6? Lovely mug, too!
-
Bam2015 reacted to a post in a topic: Are exhibitions or juried art shows worth entering?
-
GEP reacted to a post in a topic: Are exhibitions or juried art shows worth entering?
-
Rae Reich reacted to a post in a topic: Are exhibitions or juried art shows worth entering?
-
Bisque Firing Porcelain - What Cone?
Roberta12 replied to Katie S's topic in Studio Operations and Making Work
@Katie S I have become quite adamant about "what clay is it?" Name, rank, serial number, when firing for others. If they do not know, I politely decline. A friend of mine just had a horrible kiln accident with that very thing. Melted cups and plates all over the shelves. Yes, they were low fire. Fired to mid fire. The person making the request didn't do their work. You would probably be fine with 04, probably. But..... -
slab plates center warping during glaze fire
Roberta12 replied to chris123's topic in Studio Operations and Making Work
@chris123 When I dry my slab plates and trays, I put a bag of rice in the middle of them while they are drying. I do this with porcelain and stoneware. It's just one of the small things a potter can do to try to insure a measure of success. Along with maybe changing glazing or how you fire or or or.... What clay are you using and what temp do you bisque and fire to? Also, just a thought, "toss it on the wheel" going with clay has a memory situation, maybe carefully put the clay slab on the bat? -
A corner might be good. Clay is such a therapeutic way to manage all sorts of stress, life events. As we have all witnessed the last 4 years, prices have gone up and up and up. If you decide to go back to clay, your cost outlay would not be as steep. I hope you can find a corner. As @Denice suggested, maybe the slab roller? If it takes up a lot of space? Your life is crazy busy right now, but it will change. We had 3 kids. We get it. Best of luck to you Joseph. Roberta
-
Good question. I have 1000 firings on my L&L. My husband and I work together on it, Mostly I could do it myself, replacing elements, thermocouples, wiring etc. But it is nice to have the help. We have even replaced bricks (yes, the one on the bottom ring). And patched bricks. I helped a friend replace bricks and elements on a larger, older L&L. But I have never attempted repair on other brands. Not sure if there would be a lot of difference or not. We are hours away from any sort of help, so we had to do this on our own. L&L has GREAT over the phone, email, support. My hat is off to Rob Battey. He patiently listens to my kiln problems and gives such down to earth sensible advice. Over the phone, and via email. I really appreciate L&L. They have made it possible for me to keep my kiln running.
-
Wow!
-
@akilpots I like RSMC as well. I have one box left. I have to special order it from the clay supplier. Recently I have been trying some of Kentucky Mudworks Clay. Their Kota is wonderful. I just purchased Big Turtle, Mullhollun, and White Bear. This will be for Empty Bowl throwing. It will be a nice way to do some testing with glazes, etc. I am always on the lookout for a cone 6 red that performs well. I like the Kota porcelain, so I will use up #16 from Laguna, and I also use Speckled Buff from Laguna and I like the New Mexico Chocolate from Santa Fe Clay. All of those are available from the Denver supplier. and yes, it does appear I have a clay problem. Oh, change of subject, I was at the supplier on Tuesday and casually asked about Gerstley. They had it in stock $224 for 50 pounds. I picked it up for my friend. I have 50#s and not sure what I will do when it's gone. They told me Laguna held 2 pallets for them, but that is probably it.